Rotabili Italiani

Effettua l'accesso o una nuova registrazione.

Inserisci il nome utente, la password e la durata della sessione.
Ricerca avanzata  

News:

Autore Topic: Catenaries  (Letto 4248 volte)

Akisf19

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 7
    • Mostra profilo
Catenaries
« il: 15 Marzo 2022 - 22:52:34 »

Hello there all..Good evening..I am Akis from Greece and nice to meet you all. I have a question and i want everybody who knows to help me to a problem. I have a packet of electrification from french and i want to put the contact circles and return circles to every model so i can connect with a wire from one pole to the next pole.. does anyone knows how can i do this. All models are fronm 3ds Max..

Wait for your replies.
Regards
Akis..
« Ultima modifica: 18 Marzo 2022 - 21:43:55 da Akisf19 »
Connesso

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #1 il: 17 Marzo 2022 - 12:57:14 »

Hi, to do this you need to create a "node" in 3Ds Max where you have to put wires, one node for each wire, and call it 1_0128_wire.

After this, you need to create your gantry blueprint with the same node and set it into a "contact wire" for the wire that touch the pantograph, and "return wire" for the other wire.
Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%

Akisf19

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 7
    • Mostra profilo
Re:Catenaries
« Risposta #2 il: 18 Marzo 2022 - 21:50:42 »

Hey friend..would you please show me the steps with every detail on how to do it cause i dont know the basics on these programms..its a fully packet and connecting with a wire i need only the contact circles and return circles..Wires i have from others electrifications..If you want to help me show me the steps on 3ds max. Or if you want i will send you all the 3d files to do it for me.. If you have time and want to help me..

Have a nice night my friend.
Connesso

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #3 il: 19 Marzo 2022 - 22:02:57 »

Hi, due to some problem at moment  I haven't time but now try to explain how do it yourself.

In first, open the 3D with 3Ds;
The next step is create the node, so:
- create a cube with very small size, apply to it a texture and rename it 1_0128_node1
- set the position of this cube in the poin where you have to connect cables (the return wire for example)
- link this cube at the main object
- export the object as .IGS file

This for the 3D file, for the export in the blueprint can you wait a little? I need to post you an image (it more easy to understand)
Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #4 il: 20 Marzo 2022 - 15:13:05 »

Here for the next points......

How you can see in the attached pics, when you create the gantry blueprint for your 3D file just exported, it necessary to set up the node as in the image.

So, when you have your exported 3D file with texture:
- copy it into the "source" folder inside your Railworks directory (if you didn't have this folder, create it)
- oper the blueprint.exe
- goto  your source folder/provider/product and find the 3D file
- there, create a new gentry blueprint
- set this blueprint with the needed information
- set up the node (as you can see in the image)
- export the file

Hope this is helpful, in any case, I'm here!
Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%

Akisf19

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 7
    • Mostra profilo
Re:Catenaries
« Risposta #5 il: 21 Marzo 2022 - 22:55:31 »

Credo di aver capito... ma ci proverò... ha fatto lo stesso per i modelli italiani? Ho i cavi per mettere solo i cerchi mancano da ogni modello creato da ogni creatore..

Grazie mille
Se trovi il tempo e io non posso aiutarti se vuoi che li sistemiamo..

Buona serata
« Ultima modifica: 24 Marzo 2022 - 00:19:41 da Akisf19 »
Connesso

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #6 il: 22 Marzo 2022 - 11:25:56 »

Write directly in Greek it's a bit difficult to translate and understand, but it's ok, don't worry  :occhiolino

Yes, you can use cables from other gantry.

This is the same procedure for gantry or any other things that's require wire attached

Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%

Akisf19

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 7
    • Mostra profilo
Re:Catenaries
« Risposta #7 il: 22 Marzo 2022 - 22:19:44 »

Questi sono i passaggi per inserire il cerchio di contatto e il cerchio di ritorno in ogni modello 3D; Infatti spero di poterlo fare perchè a dire il vero non ce l'ho per niente con questi programmi.. almeno non ci ho ancora provato.. spero che troviate utili le vostre indicazioni amico mio.. Stai bene ma aiuterebbe io ad esempio per avere un modello a caso e per vedere in un video come si fa..ma quello che mi dici va bene...!!!lo proverò e spero che non mi renda difficile.
Buona Notte!!!
« Ultima modifica: 24 Marzo 2022 - 00:20:29 da Akisf19 »
Connesso

Claudio Mussa

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 2.523
  • Coordinatore Staff RI
    • Mostra profilo
Re:Catenaries
« Risposta #8 il: 23 Marzo 2022 - 21:33:48 »

Hi Aksif,
as you know this is an Italian forum and therefore I kindly ask you the courtesy, from now on, to post your messages in English or even better in Italian
This way more people will be able to understand them immediately without having to translate them.
You do it once and for all.
Thanks Claudio
---------
Ciao Aksif,
come sai questo è un forum Italiano e quindi gentilmente ti chiedo la cortesia, da ora in poi, di postare i tuoi messaggi in lingua Inglese o ancora meglio in lingua Italiana
Così più persone potranno comprenderli subito senza doverli tradurre.
Lo fai tu una sola volta per tutti.
Grazie Claudio
Connesso
Cordiali Saluti, Claudio Mussa coordinatore Staff RI

Akisf19

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 7
    • Mostra profilo
Re:Catenaries
« Risposta #9 il: 24 Marzo 2022 - 00:16:56 »

Ιts ok Claudio and sorry..if you want i can edit my last post to english..
Connesso

Raffo

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 49
    • Mostra profilo
Re:Catenaries
« Risposta #10 il: 24 Marzo 2022 - 14:59:09 »

Here for the next points......

How you can see in the attached pics, when you create the gantry blueprint for your 3D file just exported, it necessary to set up the node as in the image.

So, when you have your exported 3D file with texture:
- copy it into the "source" folder inside your Railworks directory (if you didn't have this folder, create it)
- oper the blueprint.exe
- goto  your source folder/provider/product and find the 3D file
- there, create a new gentry blueprint
- set this blueprint with the needed information
- set up the node (as you can see in the image)
- export the file

Hope this is helpful, in any case, I'm here!

Buon pomeriggio Fabio, io già da tempo sperimentavo questa cosa degli snap, praticamente ho due problemi, il primo è che il cavo portante compare a solo uno dei due cavi della catenaria, l'altro problema è che una volta impostato il gantry compariva solo un lato(interno per esempio) e non l'esterna, quindi alternava a spazi vuoti, come posso risolvere?
« Ultima modifica: 25 Marzo 2022 - 17:47:39 da Raffaele Capaldo »
Connesso
Raffaele

Raffo

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 49
    • Mostra profilo
Re:Catenaries
« Risposta #11 il: 24 Marzo 2022 - 15:55:58 »

Inoltre ho anche un problema sulla posizione della mensola, eppure su blender l'origine si trova a metà tra le due mensole
Connesso
Raffaele

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #12 il: 26 Marzo 2022 - 21:25:31 »

Ciao, non ho ben capito che intendi dire con "è a metà delle 2 mensole....  :uhm
Parli del posizionamento sul binario o dei tiranti i rispetto al palo?

Per i punti di ancoraggio, devi creare sia quello per il filo che per la fune nella tua mensola
Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%

Raffo

  • Nuovo arrivato
  • *
  • Offline Offline
  • Post: 49
    • Mostra profilo
Re:Catenaries
« Risposta #13 il: 27 Marzo 2022 - 10:27:26 »

Buongiorno, i problemi sono riuscito a risolverli, rimane solo il gantry il problema, ovvero che compare solo la mensola interna (nel mio caso) ma l'esterna no, lasciando uno spazio vuoto ove dovrebbe esserci. Lascio uno screen del blueprint
Connesso
Raffaele

exp 1648

  • Admin
  • Utente storico
  • *****
  • Offline Offline
  • Post: 940
  • RW Developer creator...
    • Mostra profilo
Re:Catenaries
« Risposta #14 il: 27 Marzo 2022 - 12:31:47 »

Devi usare il "Track Gantry set Blueprint" non il "gantry blueprint"  :occhiolino

Il resto del settaggio è pressoché identico a quello che hai già inserito in quel Blueprint nella foto
Connesso
Fabio Bosi_____________Email: ffabio89[at]hotmail.it // Skype: fabio.bosi89
Lavori attualmente in corso per RW3 - TS 2014:
> Tratta reale "Ferrovie Emilia Romagna"- 12% secondo lotto
> Tratta di fantasia "Linea di confine"- 38%
> Carrozze Vivalto - 27%
> Aln 668 - 16%